Print2RDP supports mounting printers through Ericom Blaze Client connections from Windows desktop computers to servers.
In order to use Print2RDP with Ericom Blaze Client, the Print2RDP client, and Ericom Blaze Client has to be installed on the client computer and the Print2RDP Server and Ericom Access Server has to be installed on the server computer.
On the Client system, select the printers to be mounted in Print2RDP Client, and go to Ericom Blaze Client > Local Resources tab > click on the 3rd party addins… button.
Make sure that Print2RDP (or formerly ePrint2Anywhere) is checked.
Once the printers are selected in Print2RDP Client, and the Print2RDP is checked in the Ericom Blaze Client, one can connect to the server under the Ericom Blaze Client General tab.
NOTE: In order to successfully mount the printers from the client computer with Print2RDP, the Print2RDP Server must be installed on the server computer.
After one is connected to the server, the selected printers in Print2RDP Client will show up among the Control Panel > Devices and Printers on the server system.
