Sharing Agent Printers is similar as sharing any other virtual or physical printers.
Agent Printers are not available in OEM Printer Drivers.
Printer Sharing Limitations
When sharing Black Ice printers over a network, there are some restrictions that must be taken into consideration. For the complete list of limitations, refer to the Printer Sharing Limitations section.
Sharing Agent Printers
Throughout this section the following terminology is used:
Host Printer: The Black Ice printer driver installed and shared on a system is the “host” machine. The term “host” does not necessarily mean a Windows Server operating system.
Client Printer: The “Client” system’s printer, prints on the “host” printer. The shared Black Ice “host” printer driver adds a network printer to the “client” system. This “client” printer will generate an output on the “host” printer driver.
1. To Share a Black Ice Printer Driver, first create and configure the Agent Printer you would like to share based on the Adding a new Agent Printer section of the manual. For configuring Agent Printers for all users on the computer, please follow the Configuring Agent Printers for every user section of the manual.
2. When the Agent Printer is created and configured, go to Control Panel > Printers and Devices and right click on the Agent printer you would like to share, and click on Printer properties. If you cannot see the Agent printer, right click on the base Black Ice printer, and you will see a list of the Agent printers under Printer properties item.
3. On the Sharing tab, check the Share this printer checkbox, and enter a Share name. The printer will be displayed with this name on the network.
4. When finished, click on the Apply button. The Printer Driver is shared successfully.
5. To add the shared printer on the client computer, go to Control Panel > Devices and Printers and click on the Add a printer option.
6. Follow the instructions of the Add Printer wizard, and add the network printer.
7. Click on the Next button, and install the required drivers for the printer driver if needed.
8. If the printer driver is added successfully, the following window appears.
9. The shared Agent printer is successfully added on the client computer.